All articles
Voron 2.4, Trident and V0.2 build guides, kit sourcing checks, and Klipper input shaper and pressure advance tuning for CoreXY printers.
-
How to Install Klipper on Raspberry Pi
Install Klipper with MainsailOS or KIAUH, flash the correct printer firmware, configure printer.cfg, and check heaters and motion before printing.
-
Klipper Pressure Advance Tuning Guide: Calibrate and Save PA
Tune Klipper pressure advance with direct-drive and Bowden tower commands, the height formula, slicer checks, and saved PA settings.
-
Voron 2.4 vs Bambu Lab P1S: Build It or Buy It?
Voron 2.4 and Bambu Lab P1S compared on build volume, speed ceiling, materials, repairability and true cost, with a plain rule for choosing between them.
-
Voron Sourcing Guide: What to Check Before Ordering a Kit
The Voron kit checks worth making before you pay: printed-part material, extrusion profile, rail grade, bed plate alloy, stepper spec and driver count.
-
Voron 2.4 Input Shaping: ADXL345 Setup and Tuning
Wire an ADXL345 to a Voron 2.4, run TEST_RESONANCES and SHAPER_CALIBRATE, choose between MZV and EI, and set a max_accel the machine can actually hold.
-
Which Voron Should You Build? V0, Trident, 2.4, Switchwire
Voron V0.2, Trident, 2.4 and Switchwire compared on build volume, motor count and build difficulty, plus what kit sourcing and Klipper tuning demand.